Maryam_305638
Jan 18, 2018Nimbostratus
traffic from APM to Domain Controller
Hello,
We have configured the APM for exchange 2016 to use NTLM in test environment and it is working fine . the communication from LTM is open to DC over the management interface. Now moving on...
- Jan 22, 2018
Hello Maryam,
You can use either Management interface or TMM interface to reach your Domain controller. If a destination address does not match that of the management interface network, and no static route is specified besides a default management gateway, the system uses the default gateway that the TMM specifies.
So just make sure that the DC is reachable to F5 , and the required ports and services is enabled.
Note : if SMBv1 is disabled on the DC . this will cause the BIG-IP APM system not to be able to successfully authenticate clients using NTLM. https://support.f5.com/csp/article/K55889450