Port Forwarding from VS to Pool
I am attempting to set up a new Virtual Server to listen on and forward to a pool member on port 4002, I have the VS, The Pool, and the member server all green. I can telnet to the member server in the pool on port 4002, however when I attempt to telnet to the VS on 4002 (which is set to listen on all * ports) there is no successful connection. The IP address of the member server is the VIP for a MS Cluster for two HA servers. I have attempted to do the same work using the actual IP address of the VM server listening on 4002. I know that it is something simple, perhaps an iRule, or a profile that I am missing, any help would be very much appreciated.
We have this resolved. Initially it was necessary to add the new vlans to the port channels used for the f5 to communicate with the balance of the application infrastructure. Once this was accomplished and irule to limit the VS to the specific ports required for application delivery was applied and finally to insure IP persistence through the entire data flow for the application the default gateway for the application servers had to be set to the float ip for the VLAN on the application servers, routing return traffic back through the BigIP.