Forum Discussion

  • Another option would be putting an iRule on your Virtual Server that checks for "active_members" and if none are available it will redirect them to a Friendly Page?

     

    I ask because you could then apply individual connection limits to your servers (once all of the servers in the pool have reached their connection limit they are considered "unavailable" which would then trigger your "active_members" iRule).

     

    Setting a connection limit on the Virtual Sever would not have the same behavior:

     

    SOL9812: Overview of BIG-IP TCP RST behavior

     

    When a virtual server connection limit is configured, and the maximum number of concurrent connections is exceeded for the virtual server, the BIG-IP sends a TCP RST packet in response to connection attempts. The TCP RST packet is sent on the client side of the connection, and the source IP address of the reset is the relevant virtual server IP address.

     

    Its always nice to have options.

     

    • Kirit_Patel_521's avatar
      Kirit_Patel_521
      Icon for Nimbostratus rankNimbostratus
      Michael I need something limit by sessions. So lets says 4 users logged in that should be 4 sessions. If the limit is set to 5 . The 5th user should be redirected to a friendly page. But other 4 sessions should stay on Is thats possible?
  • Another option would be putting an iRule on your Virtual Server that checks for "active_members" and if none are available it will redirect them to a Friendly Page?

     

    I ask because you could then apply individual connection limits to your servers (once all of the servers in the pool have reached their connection limit they are considered "unavailable" which would then trigger your "active_members" iRule).

     

    Setting a connection limit on the Virtual Sever would not have the same behavior:

     

    SOL9812: Overview of BIG-IP TCP RST behavior

     

    When a virtual server connection limit is configured, and the maximum number of concurrent connections is exceeded for the virtual server, the BIG-IP sends a TCP RST packet in response to connection attempts. The TCP RST packet is sent on the client side of the connection, and the source IP address of the reset is the relevant virtual server IP address.

     

    Its always nice to have options.

     

    • Kirit_Patel_521's avatar
      Kirit_Patel_521
      Icon for Nimbostratus rankNimbostratus
      Michael I need something limit by sessions. So lets says 4 users logged in that should be 4 sessions. If the limit is set to 5 . The 5th user should be redirected to a friendly page. But other 4 sessions should stay on Is thats possible?
  • So lets says 4 users logged in that should be 4 sessions. If the limit is set to 5 . The 5th user should be redirected to a friendly page. But other 4 sessions should stay on Is thats possible?

     

    i think it seems to be limiting http user session rather than tcp connection or http request.

     

    CodeShare Refresh: HTTP Session Limit by Colin Walker

     

    https://devcentral.f5.com/articles/codeshare-refresh-http-session-limit

     

    HTTP session limit by hamish at travellingkiwi.com

     

    https://devcentral.f5.com/wiki/irules.HTTP_Session_Limit.ashx

     

    just my 2 cents

     

  • Hi Michael, interesting your statement regarding differences between connection limit set on a VS or on Poolmembers. But based on SOL9849 this works only if there is at least one other member available. But how can I handle it if the connection limit is reached for ALL members in a pool? Will the "active_members" part of an iRule with for example a redirect to a sorrypage still be triggered and working or is the TCP RST packet sending out before? Thank you!

     

    Ciao Stefan :)