configuring trunk with Cisco Nexus 7000
Hello everybody,
I need help to an issue.... I’ve a network problem
about Viprion and Trunks. I configured a Trunk between a Cisco Nexus 7000 and a
BIGIP Viprion with Blade 100:
Trunk
Viprion config
Link Selection
Policy Auto
Frame distribution
hash Source/Destination MAC
address
Cisco
Nexus 7000 (Port Channel)
interface
port-channel50
description
Viprion-F5-Bil
shutdown
switchport
switchport mode
trunk
switchport trunk
allowed vlan 310,330,610,630
sh port-channel
load-balance
Port Channel
Load-Balancing Configuration:
System:
source-dest-ip-vlan
Port Channel
Load-Balancing Addresses Used Per-Protocol:
Non-IP:
source-dest-mac
IP:
source-dest-ip-vlan
interface
Ethernet1/25
description
Viprion
switchport
switchport mode
trunk
switchport trunk
allowed vlan 310,330,610,630
channel-group
50
no
shutdown
The interface
port-channel50 is in shutdown because it’s in a working mode and customer don’t
want to configuring anything, it’s a critical
environment..
So, we tested the
network traffic, the trunk on Viprion goes UP and (from Nexus to Viprion) if I
try to ping the self IP, it’s working, I can’t do the revert operation and I
can’s see the server on server farm.
Now I would to
understand if I need to setting only a LACP trunk, or it’s possible to configure
in another way?
What’s happen on the
Viprion if I configure a NO LACP Trunk? And what does happened with LACP
trunk?
Could you help me for
this?
Please tell me if you
need something else.
Thanks a
lot
Best
Regards
Fabrizio.