Forum Discussion
Hamish
Mar 22, 2014Cirrocumulus
OK. So my nexus config (Which works) is
interface port-channel202
description MAN: Viprion-1 20Gb channel
switchport
switchport mode trunk
switchport trunk native vlan 1000
switchport trunk allowed vlan 105,108,1024-1255,2005-2006,2015-2016
switchport trunk allowed vlan add 4080,4086-4087
vpc 202
And then on the interfaces
interface Ethernet4/18
description MAN: Viprion-1 10Gb int 1.1
switchport
switchport mode trunk
switchport trunk native vlan 1000
switchport trunk allowed vlan 105,108,1024-1255,2005-2006,2015-2016
switchport trunk allowed vlan add 4080,4086-4087
channel-group 202 mode active
no shutdown
The other interface is of course connected to Nexus 2... That config is identical.
Then the Viprion is configured with a single 'trunk' (F5 Port-Channel).
When you do a 'sh vpc ' is it Status==Up and Consistency==Success?