Forum Discussion

jwlarger's avatar
jwlarger
Icon for Cirrus rankCirrus
Oct 03, 2019

Test access sourcing from float

To test firewall rules we telnet to the pool member's service port, which proves access for the self IPs, but not for the float. Anyone know how to source from the float?

  • # telnet -b floating_self_ip destination_ip
    -b hostalias
            Uses bind(2) on the local socket to bind it to an aliased address (see ifconfig(8) and the ``alias'' 
            specifier) or to the address of another interface than the one naturally chosen by connect(2).  This 
            can be useful when connecting to services which use IP addresses for authentication and 
            reconfiguration of the server is undesirable (or impossible).

    Be aware of route domains; https://devcentral.f5.com/s/question/0D51T00006i7apM/telnet-to-server-from-f5

  • Tried both in tmos and bash on the original ltm from the start. Just tried again with another ltm with only one vlan & float. Same error 'cannot assign'.

  • Tested today with no joy. v11.6.3, only one route-domain (0). Selecting the floating self IP results in:

    Cannot assign requested address

    No connection.

    Escape character is '^]'.

    SetSockOpt: Bad file descriptor

      • Lidev's avatar
        Lidev
        Icon for MVP rankMVP

        same issue 😕

         

        #tmsh

        # telnet -b 10.xx.xx.xx yy.yy.2.2 443

        Trying yy.yy.2.2...

        Couldn't bind to 10.xx.xx.xx

         

        it works with selfip but not with floating selfip

    • Andrew-F5's avatar
      Andrew-F5
      Icon for Employee rankEmployee

      Do an 'ifconfig' at bash then look for the vlan name for that floating IP or look for the IP itself.

       

  • # telnet -b floating_self_ip destination_ip
    -b hostalias
            Uses bind(2) on the local socket to bind it to an aliased address (see ifconfig(8) and the ``alias'' 
            specifier) or to the address of another interface than the one naturally chosen by connect(2).  This 
            can be useful when connecting to services which use IP addresses for authentication and 
            reconfiguration of the server is undesirable (or impossible).

    Be aware of route domains; https://devcentral.f5.com/s/question/0D51T00006i7apM/telnet-to-server-from-f5