Forum Discussion
Regarding SNAT issue, can anyone explain ehat this output means:
show ltm snat LAMP_subnet_to_ext detail
---------------------------------
Ltm::SNAT: LAMP_subnet_to_ext
---------------------------------
Traffic ClientSide
Bits In 30.5K
Bits Out 29.7K
Packets In 82
Packets Out 82
Current Connections 1
Maximum Connections 5
Total Connections 19
-------------------------------------
| Ltm::SNAT Pool: SNAT_to_Internet_pl
-------------------------------------
| Traffic ServerSide
| Bits In 0
| Bits Out 0
| Packets In 0
| Packets Out 0
| Current Connections 0
| Maximum Connections 0
| Total Connections 0
SNAT object is using SNAT Pool, SNAT pool is not seeing any traffic (so no src IP translations) but SNAT object sees traffic and even has open connections.
But when doing
tmsh show sys connections
there are only connections like that:
10.128.30.151:123 194.146.251.101:123 10.129.10.13:123 194.146.251.101:123 udp 169 (tmm: 0) 192.168.1.2:51914 192.168.1.1:1026 192.168.1.2:51914 192.168.1.1:1026 udp 0 (tmm: 0) 192.168.1.1:38978 192.168.1.2:1026 192.168.1.1:38978 192.168.1.2:1026 udp 0 (tmm: 0) 10.128.40.239:56372 10.128.40.110:8081 10.128.40.239:56372 10.128.40.110:8081 tcp 0 (tmm: 0)
So sure there are connections from subnet set in SNAT object (10.128.30.0/24) but those are handled by wildcard VS (server side src IP 10.129.10.13 - floating self ip - snat automap).
So what's going on here?
Stats stops to increase when I set Disable On in SNAT with internal VLAN selected. Is I have Enabled on with empty Selected then stats are still increasing.
Piotr