Forum Discussion

cjunior_138458's avatar
cjunior_138458
Icon for Altostratus rankAltostratus
Feb 19, 2014

Hard-wired Failover 4000 series and 8900 series

It is possible that between these two devices? What about the pinout of cable. Tks!  
  • Night_67217's avatar
    Feb 19, 2014

    Hi Claudio,

     

    For hardware failover, the systems must be running the same hardware: http://support.f5.com/kb/en-us/solutions/public/8000/600/sol8665.html?sr=35248250

     

    Starting from v11.4.x, the software failover can be configured between heterogenous devices: http://support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/tmos-implementations-11-5-0/6.html?sr=35248250

     

    Those 2 devices you're mentioning don't have the same hardware architecture, capabilities, etc. So assuming you'd be able to hack this, and you have all your connections going to the 8900, if it fails and all traffic moves the 4000 series, it's a different number of TMMs, different architecture processing your traffic, which may very well break. I would strongly advise against this and I don't think it's an F5 supported config.

     

    Cheers!